Field Execution Platform for Contractors
Stop Flipping. Start Building.
TradePlane turns your drawings into a live field execution hub, connecting crews, devices, submittals, and daily reports all from the plans you're already working from.
The drawings are the job. So why aren't they working for you?
You're flipping through plan sets, digging through email, and chasing foremen at end of shift. Yet somehow you still owe the GC a complete daily report before you leave.
Every foreman, super, and PM on your job site is dealing with the same problem: critical information is buried inside static drawings. Which receptacle ties to which circuit? Which panel? What did Crew 3 log on Level 4 six hours ago? Where's the submittal for that unit the inspector just flagged?
That's not a people problem. That's a tool problem. And it's costing you time, accuracy, and protection when disputes arise.
"If it's not documented, it didn't happen. Not to your GC, not to the owner, not in arbitration."
20+ years of field experience behind TradePlaneWhat's Breaking in the Field
📋 End-of-Shift Report Scramble
Pulling from memory six hours later is how details get missed. Missed details become disputes, denied change orders, and lost revenue.
🔌 No Device-to-Panel Traceability
Which receptacle goes to which circuit? Which panel feeds it? Without a live link, your team is flipping drawings to answer a question that should take two seconds.
📁 Submittals Buried Somewhere
The inspector needs the submittal package for a specific piece of equipment, right now. Is it in your email? A binder in the trailer? A shared drive nobody can find?
👷 Multiple Crews, Zero Visibility
Your foremen are logging separately or not at all. By the time you compile it into a daily report, the workday is a blur and the details are gone.
🗂️ Static Drawings, No Context
Drawings were designed to be read, not worked from. They tell you what to build. They don't tell you what's been built, what's linked to what, or what was logged today.
🏗️ The Handoff Gap
Construction ends and the building's knowledge walks off the job with the last foreman. Owners get a box of binders, not a system they can actually use to maintain what you built.
Five steps from drawings to done.
TradePlane was built around the drawings your crews are already using, not another system they have to learn from scratch.
Upload Your Drawings
Drop in your plan set. TradePlane reads your drawings and turns them into a live, interactive field tool. No manual setup, no redrawing, no IT team required.
Link Devices & Endpoints
Tag any device, receptacle, or piece of equipment on the drawing. TradePlane links it back to its circuit, panel, submittal package, and spec section. Connected and searchable in seconds.
Log Activities as They Happen
Crews log work directly on the drawing, tied to the exact location, in real time. No end-of-day guesswork. No chasing foremen. Everything captured on the spot.
Daily Report Writes Itself
Every crew log, every activity, every note compiles automatically into a clean, GC-ready daily report. Send it before you leave the job site, every single day.
Hand Off a Living Building
When the job is done, your drawings don't end up in a box. TradePlane becomes the building's interactive as-built map with every device, system, and document still connected and accessible for the owner's facility team.
Built for every seat at the table.
Whether you're running crews in the field or tracking costs from the office, TradePlane gives everyone the visibility they need from the same set of drawings.
Trade Contractors
You're managing multiple crews across multiple floors, tracking device installations, and logging daily activities. You still owe the GC a complete report by end of shift. TradePlane was built for exactly this.
Every activity your crews log is tied directly to the drawing: the specific location, device, and crew that did the work. Your daily report is compiled automatically. Your submittals are linked to the right piece of equipment. Your panel schedule is always one tap away.
Join the WaitlistDevice-to-Panel Traceability
Every receptacle, fixture, and device linked back to its circuit, panel, and endpoint instantly.
Automated Daily Reports
Field logs compile into a formatted, GC-ready report before end of shift, automatically.
Submittal Integration
Submittals and spec sections tied directly to the equipment they cover. Pull them up on the spot.
General Contractors
You're coordinating multiple trade contractors and expecting daily reports that are complete and on time. You're monitoring progress across a job site you can't always be standing on. TradePlane gives you that visibility, right from the drawings.
Every sub's daily log feeds into a unified project view tied to the drawings. No more chasing incomplete reports or reconciling what three subs claim happened on Level 6 yesterday.
Join the WaitlistCross-Contractor Visibility
See what every trade logged on the drawing, without making a single phone call.
Daily Report Consolidation
All sub reports compiled in one place, on time, every day. No gaps, no chasing.
Owners & Owner-Agents
You're investing in a project and relying on field reports, RFIs, and submittals to tell you what's happening. But those reports are only as accurate as the tool the foreman used to write them at 5pm after a 10-hour shift. TradePlane closes that gap.
Real-time activity logs tied to drawings. Submittals linked to specific equipment. A complete, auditable daily record that protects your project and your investment.
After closeout, TradePlane becomes your building's interactive as-built record. Every device, system, and drawing stays connected and accessible for your facility team, not buried in a box of binders that nobody opens.
Join the WaitlistAuditable Daily Record
Every activity logged in real time: a complete, defensible paper trail for disputes, inspections, and closeout.
Drawing-Level Accountability
Activity tied to exact drawing locations, not a generic paragraph in a PDF report.
Submittal & Spec Visibility
Know that every piece of equipment has its submittal package tied to it, before the inspector asks.
Post-Construction As-Built Map
After closeout, your building lives on in TradePlane as an interactive O&M manual for your facility team.
Project Managers
You're the one who has to reconcile what the field logged, what the GC is asking for, and what actually happened. Often without being on site when any of it went down. TradePlane gives you the field's eyes.
Live activity logs tied to drawings across all crews. Daily reports that compile themselves. Submittals and specs attached to the right equipment. All from one tool that the field crew actually uses.
Join the WaitlistDrawing-Native Activity Log
See every crew's work tied to the exact location on the drawing, in real time.
End-of-Day Time Back
Stop compiling reports manually. TradePlane does it automatically from field logs.
Device Traceability
Every device linked to its endpoint. Answer inspector questions in seconds, not minutes.
Field Foremen & Crews
You're not looking for another app to learn. You need something that works the way the job works: fast, simple, and tied to the drawings you're already looking at. That's exactly what TradePlane is.
Log activities directly on the drawing. Tag the device you just installed. Pull up the submittal for the unit the inspector is standing next to. Done. No binders, no searching, no digging through email.
Join the WaitlistWorks From Your Phone or Tablet
Built for mobile. Log, tag, and pull submittals on the spot. No laptop, no trailer required.
Log It Right on the Drawing
Tap the location on the drawing, log the activity. No forms to fill out. No separate app to open.
Find Any Device in Seconds
Tap any device on the drawing to see its circuit, panel, submittal, and spec. All linked, all instant.
Everything the field actually needs.
No bloated software. No six-month implementation. Just the tools your crews need on the job site built around the drawings they're already using.
Drawing-Native Execution
Work directly on your drawings, not in a spreadsheet, not in a separate system. Every activity, device, and note is tied to exactly where it lives on the plan.
Core PlatformDevice-to-Panel Traceability
Tag any receptacle, fixture, or piece of equipment and link it back to its circuit, panel, and electrical endpoint. No more flipping through drawings to trace a circuit.
Electrical & MEPSubmittal & Spec Integration
Tie submittal packages and spec sections directly to the equipment they cover. Pull them up on the spot when the inspector asks. No binder digging required.
Document ControlMulti-Crew Activity Logging
All your crews log activities in one place, in real time, tied to the drawing. No more tracking down foremen at end of shift to piece together what happened where.
Field ReportingAutomated Daily Reports
Field logs compile automatically into a formatted, GC-ready daily report. Complete, accurate, and sent before you leave the job site. Every time. Not just when someone has time.
ReportingOwner Handoff & Building Maintenance
When the job is done, TradePlane becomes the building's interactive as-built map. Owners and facility teams get a visual O&M manual tied to every device, system, and drawing -- not a box of binders collecting dust.
Post-ConstructionBuilt by people who've been on the job site.
Field guides, product updates, and real talk about construction execution, from a team that's lived it.
Why Your Daily Report Is Your Most Important Legal Document
Most contractors treat the daily report as a checkbox. Here's why it's actually your primary protection in a dispute, a delay claim, or an inspection. And how to make sure yours holds up.
Read the Guide →Device-to-Panel Traceability: How TradePlane Links Your Electrical Systems
A walkthrough of how TradePlane connects every receptacle, circuit, and panel in your drawings. Plus what that means for inspections, troubleshooting, and closeout.
Read the How-To →The Real Cost of a Late or Incomplete Daily Report on a Commercial Job Site
Missed entries. Disputed change orders. Denied claims. We broke down the real dollar and hour cost of daily reporting gaps and what contractors are doing about it.
Read the Insight →See It on Your Drawings.
Bring your drawings. We'll pull them into TradePlane live and walk you through exactly how your crew would use it tomorrow morning. No slides. No script. Just your plans, working the way they should.
No commitment. No credit card. 30 minutes with someone who's carried a set of plans, not just sold software.
Get on the Waitlist
TradePlane is heading into pilot. Get early access before we open to the public and lock in founding contractor pricing.
No spam. We'll reach out when your spot is ready.